<menuitem id="dr3l9"></menuitem>

          <bdo id="dr3l9"></bdo>

          1. 新聞資訊

            首頁>>新聞資訊

            挖掘機磨合期怎么做好保養措施?

            日期:2018-06-28   來源:http://www.idsashop.com/
            1、由于工程機械是特殊車輛,操作人員應接受生產廠家的培訓、指導,對機器的結構、性能有充分的了解,并獲得一定的操作及維護經驗方可操作機器。生產廠家提供的產品使用維護說明書,是操作者操作設備的必備資料,在操作機器前,一定要先閱讀使用維護說明書,按說明書的要求進行操作、保養。
            1. Because the engineering machinery is a special vehicle, the operator should receive training and guidance from the manufacturer, have a full understanding of the structure and performance of the machine, and obtain certain operating and maintenance experience to operate the machine. The production and maintenance instructions provided by the manufacturer are the necessary information for the operator to operate the equipment. Before operating the machine, we must read the maintenance instructions first, and operate and maintain the instructions according to the requirements of the instructions.
            2、注意磨合期的工作負荷,磨合期內的工作負荷一般不要超過額定工作負荷的80%,并要安排適合的工作量,防止機器長時間連續作業所引起的過熱現象的發生。
            2. Pay attention to the working load during the running in period. The working load in the running in period is generally not more than 80% of the rated working load, and the suitable amount of work should be arranged to prevent the overheating phenomenon caused by the continuous operation of the machine for a long time.

            3、注意經常觀察各儀表指示,出現異常,應及時停車予以排除,在原因未找到,故障未排除前,應停止作業。
            3, pay attention to frequently observe the instrument instructions, abnormal, should be stopped in time to exclude, the cause is not found, failure is not ruled out before, should stop operation.
            4、注意經常檢查潤滑油、液壓油、冷卻液、制動液以及燃油油(水)位和品質,并注意檢查整機的密封性。檢查中發現油水缺少過多,應分析原因。同時,應強化各潤滑點的潤滑,建議在磨合期內,每班都要對潤滑點加注潤滑脂(特殊要求除外)。
            4, pay attention to checking the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) regularly, and check the tightness of the whole machine. It is found that there is too much oil and water in the inspection, and the reason should be analyzed. At the same time, the lubrication of each lubricating point should be strengthened. It is suggested that lubricating grease should be added to each lubrication point during the running in period (except for special requirements).
            5、保持機器清潔,及時調整、緊固松動的零部件,以防因松動而加劇零部件的磨損或導致零部件丟失。
            5, keep the machine clean, adjust and fasten loose parts in time to prevent wear and tear or loose parts.
            6、磨合期結束,應對機器進行強制保養,做好檢查和調整工作,同時注意油液的更換。
            6. When the running in period is over, the machine should be forced to maintain, check and adjust, and pay attention to the replacement of the oil.
            以上就是給大家分享的內容了,想要了解更多的精彩內容請點擊進入我們的網站http://www.idsashop.com,或者是搜索我們的加長臂挖掘機出租關鍵詞查找,我們會有更多的精彩內容與您分享!
            The above is to share the content, to understand more interesting content please click into our official website http://www.idsashop.com, or search our long arm excavator rental keyword search, we will have more wonderful content to share with you!

            【本站圖片均由網站所有方提供,部分圖片來源于網絡,如無意中侵犯了某媒體或個人的知識產權,請來信或來電告之,本網站將立即刪除?!?/p> 亚洲精品网站在线播放_加勒比东京热不卡一区二区_国产精品亚洲专区一区_精品精品国产精品